Please use this identifier to cite or link to this item:
Title: Residual stress profiles in riveted joints of steel sheets
Authors: Haque, R
Wong, YC
Paradowska, AM
Durandet, Y
Keywords: Residual stresses
Neutron diffraction
Carbon steels
Tensile properties
Issue Date: 28-Dec-2014
Publisher: Taylor and Francis
Citation: Haque, R., Wong, Y. C., Paradowska, A., & Durandet, Y. (2014). Residual stress profiles in riveted joints of steel sheets. Science and Technology of Welding and Joining, 20(3), 199-207. doi:10.1179/1362171814Y.0000000272
Abstract: The residual stress profiles in two different self-piercing riveted (SPR) joints were characterised using the neutron diffraction technique. The joints were produced using semi-tubular steel rivets and carbon steel sheets of different thicknesses and hardnesses. The residual stress in the sheet material inside the bore of the rivet was compressive at the centre and the stress became tensile away from the centre. The stresses found in the semi-tubular rivet were compressive, with a lower magnitude in the rivet head compared with those in the rivet leg. For the SPR joints examined, the compressive residual stress in the rivet leg was greater for the thin joint than the thick joint, and this was due to the higher force gradient encountered during the rivet flaring stage. The originality of this work was to relate the residual stress profile to the physical event that occurred during the SPR process. © 2021 Informa UK Limited
ISSN: 1362-1718
Appears in Collections:Journal Articles

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.