Please use this identifier to cite or link to this item:
https://apo.ansto.gov.au/dspace/handle/10238/12312
Title: | Characterisation of a well-type NaI(T1) detector by means of a Monte Carlo simulation for radionuclide metrology application |
Authors: | Heranudin, H Smith, ML van Wyngaardt, WM Guatelli, S Li, E Rosenfeld, AB |
Keywords: | Monte Carlo Method ANSTO Radioactivity Metrology Radionuclide metrology Measuring instruments Meters Phosphors |
Issue Date: | Oct-2021 |
Publisher: | Elsevier B. V. |
Citation: | Heranudin, Smith, M. L., van Wyngaardt, W. M., Guatelli, S., Li, E., & Rosenfeld, A. (2021). Characterisation of a well-type NaI(T1) detector by means of a Monte Carlo simulation for radionuclide metrology application. Applied Radiation and Isotopes, 176, 109889. doi:10.1016/j.apradiso.2021.109889 |
Abstract: | A well-type NaI(Tl) detector was modelled and characterised by means of a Monte Carlo simulation, as part of a project to develop a 4πβ (Plastic Scintillator)-4πγ instrument to be used for the primary standardisation of radionuclides at ANSTO. The simulation based on GEANT4 was used to characterise the 4πγ detector in terms of potential dead layer/inactive materials, full energy peak efficiency, coincidence-summing correction, and energy resolution. An excellent agreement was obtained between the simulation results and the experimental measurements. © 2021 Elsevier Ltd. |
Description: | The first author is listed as Heranundin. The citation as shown is correct. The author is Heranudin Heranudin Center for Radioisotope and Radiopharmaceutical Technology, National Nuclear Energy Agency (BATAN), Puspiptek Area, Serpong, South Tangerang. |
URI: | https://doi.org/10.1016/j.apradiso.2021.109889 https://apo.ansto.gov.au/dspace/handle/10238/12312 |
ISSN: | 0969-8043 |
Appears in Collections: | Journal Articles |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.