Please use this identifier to cite or link to this item:
Title: Neutron moisture probes: the minimum error attainable.
Authors: Wilson, DJ
Keywords: Neutron flux
Moisture gages
Issue Date: Apr-1987
Publisher: Australian Atomic Energy Commission
Citation: Wilson, D. J. (1987). Neutron moisture probes: the minimum error attainable. (AAEC/E651). Lucas Heights, N.S.W.: Research Establishment, Australian Atomic Energy Commission.
Abstract: The effect of the soil parameters dry density mass absorption and mass scattering coefficients on the neutron flux at the detector of a neutron moisture probe has been described previously by a set of polynomial equations. The partial derivatives of these equations have been used to determine the deviation introduced into water density calculation by a one per cent inaccuracy in each of the parameters. Accuracy of measurement of the soil parameters is discussed and applied to a typical soil at various water densities. The accuracy to which soil parameters can be measured is examined and found to be approximately +- 2% for the dry soil density +- 1% for the mass absorption coefficient and +- 2% for the mass scattering coefficient. Using these data together with a statistical accuracy of +- 1% in the probe count rate the minimum error achievable for the water density varies between +- 3.5% at a water density of 0.06 g cm - 3 and +- 1.55% at a water density of 0.41 g cm - 3.
Gov't Doc #: 758
ISBN: 0642598703
Appears in Collections:Scientific and Technical Reports

Files in This Item:
File Description SizeFormat 
AAEC-E-651.pdf574.84 kBAdobe PDFThumbnail

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.